TGC The Game Changer

H2 Physics Capacitance: Capacitors, Energy and RC Circuits

Quick answer: a capacitor stores charge. Capacitance is the charge stored per unit p.d., C = Q/V. Through a resistor it charges and discharges exponentially, with time constant τ = RC.

1Where capacitance sits in 9478

TopicOutcomeWhat you must be able to do
14. Electric Fields(j)Define capacitance and use C = Q/V
14. Electric Fields(k)Energy stored = area under the V against Q graph. Use U = ½QV = ½Q²/C = ½CV²
16. Circuits(k)Combined capacitance of capacitors in series and in parallel
16. Circuits(l)Describe and sketch Q, V and I against time for charging and discharging through a resistor, with τ = RC

Capacitance is new in 9478. See the full H2 Physics syllabus 9478 guide.

2Key formulas

QuantityFormulaGiven in exam?
CapacitanceC = Q/VNo, memorise
Energy storedU = ½QV = ½Q²/C = ½CV²Yes
Capacitors in parallelC = C₁ + C₂ + ...Yes
Capacitors in series1/C = 1/C₁ + 1/C₂ + ...Yes
DischargingQ = Q₀e−t/τYes
ChargingQ = Q₀[1 − e−t/τ]Yes
Time constantτ = RCYes

"Given" means it is in the formula list printed in the 9478 question papers.

3What capacitance means

  • Definition: capacitance is the ratio of the charge stored to the potential difference, C = Q/V.
  • Unit: the farad, F. 1 F = 1 C V⁻¹.
  • Q is the charge on one plate. One plate holds +Q, the other −Q.
  • C is fixed for a given capacitor. Double V and Q doubles, C stays the same.
1 mF = 10⁻³ F1 μF = 10⁻⁶ F1 nF = 10⁻⁹ F1 pF = 10⁻¹² F

4Energy stored: the V against Q graph

p.d. Vcharge QV₀Q₀0gradient = 1/CArea = ½Q₀V₀= energy stored
P.d. against charge for a capacitor. The shaded area under the line is the energy stored.
  • V = Q/C, so the graph is a straight line through the origin with gradient 1/C.
  • Energy stored = area under the graph = ½Q₀V₀.
  • Why the ½: the p.d. rises from 0 to V₀ as charge is added, so the average p.d. is ½V₀.
  • Swap in Q = CV to get the other two forms: ½CV² and ½Q²/C.
  • Double V, 4 times the energy (for the same capacitor).
You knowUse
Q and VU = ½QV
C and VU = ½CV²
Q and CU = ½Q²/C

5Capacitors in series and parallel

Series

C₁C₂
  • 1/C = 1/C₁ + 1/C₂
  • Same charge Q on each
  • Supply p.d. is shared: V = V₁ + V₂
  • Total is smaller than the smallest

Parallel

C₁C₂
  • C = C₁ + C₂
  • Same p.d. V across each
  • Charge is shared: Q = Q₁ + Q₂
  • Total is larger than the largest
Capacitors combine the opposite way from resistors: capacitances add in parallel, reciprocals add in series.
  • Quick check: two equal capacitors C give 2C in parallel and ½C in series.
  • Find the combined C first, then use Q = CV for the whole combination.

6Charging and discharging through a resistor

Discharging: Q, V and I fall

τ2τ3τ4τ5τx₀0.37x₀0time t

Charging: Q and V rise

τ2τ3τ4τ5τx₀0.63x₀0time t
x stands for charge, p.d. or current. After one time constant τ = RC, a falling quantity is at 37% of x₀ and a rising one has reached 63% of x₀. While charging, the current falls like the left graph.
  • Discharging: Q₀, V₀ and I₀ are the starting values.
  • Charging: Q₀ and V₀ are the final values. V₀ is the supply p.d.
  • Current is largest at the start in both cases: I₀ = V₀/R.
  • Current always falls. A fully charged capacitor passes no current.
QuantityDischargingCharging
Charge QFalls: Q₀e−t/τRises: Q₀[1 − e−t/τ]
P.d. across capacitor VFalls: V₀e−t/τRises: V₀[1 − e−t/τ]
Current IFalls: I₀e−t/τFalls: I₀e−t/τ

7The time constant τ = RC

  • τ = RC is the time for a discharging quantity to fall to 1/e (about 37%) of its starting value.
  • Bigger R or bigger C means slower charging and discharging.
  • Units: R in Ω and C in F give τ in seconds.
  • Halving time = τ ln 2 ≈ 0.69RC.
TimeDischarging: fraction leftCharging: fraction reached
τ37%63%
2τ13.5%86.5%
3τ5.0%95.0%
5τ0.7%99.3%

After about 5τ the capacitor is treated as fully charged or fully discharged.

8Worked example (9 marks)

An uncharged 220 μF capacitor is charged through a 15 kΩ resistor from a 9.0 V supply of negligible internal resistance.

PartWorkingMarks
(a) Time constantτ = RC = (15 × 10³)(220 × 10⁻⁶) = 3.3 s1
(b) P.d. across the capacitor at t = 5.0 sV = V₀[1 − e−t/τ] = 9.0 × [1 − e−5.0/3.3] = 9.0 × 0.780 = 7.0 V2
(c) Energy stored at t = 5.0 sU = ½CV² = ½ × (220 × 10⁻⁶) × 7.02² = 5.4 × 10⁻³ J = 5.4 mJ2
(d) Time for the current to fall to 10% of its initial value0.10 = e−t/τ, so t = τ ln 10 = 3.3 × 2.30 = 7.6 s2
(e) New time constant if a second 220 μF capacitor is added in series1/C = 1/220 + 1/220, so C = 110 μF. τ = (15 × 10³)(110 × 10⁻⁶) = 1.65 s ≈ 1.7 s2

Check: the initial current is 9.0 V ÷ 15 kΩ = 0.60 mA, so in (d) it has fallen to 0.060 mA. In (e), series halves C, so charging is twice as fast.

9Common mistakes

  • Dropping the ½. QV is the work done by the supply. The energy stored is ½QV.
  • Combining capacitors like resistors. It is the opposite: add in parallel, reciprocals in series.
  • Forgetting prefixes. Convert μF to F and kΩ to Ω before finding τ.
  • Using the decay equation for a charging p.d. Rising quantities need 1 − e−t/τ.
  • Drawing the charging current as rising. Current falls in both charging and discharging.
  • Saying the capacitor is half charged after τ. It is 63% charged. Half takes 0.69τ.
  • Drawing straight lines. The curves are exponential: steep at first, then levelling off.

Keep revising

Frequently asked questions

What is capacitance in H2 Physics?

Capacitance is the ratio of the charge stored to the potential difference across the capacitor, C = Q/V. It is measured in farads, where 1 F is 1 coulomb per volt.

Why is the energy stored in a capacitor ½QV and not QV?

The p.d. rises from zero as charge is added, so the average p.d. during charging is half the final value. The energy stored is the area under the V against Q graph, a triangle of area ½QV.

What is the time constant of an RC circuit?

The time constant is τ = RC. After one time constant a discharging capacitor's charge, p.d. and current have fallen to about 37% of their starting values, and a charging capacitor has reached about 63% of its final charge.

How do you add capacitors in series and parallel?

In parallel, capacitances add: C = C₁ + C₂. In series, reciprocals add: 1/C = 1/C₁ + 1/C₂. This is the opposite of the rules for resistors.

Does the current increase or decrease when a capacitor is charging?

It decreases. The current is largest at the start, equal to the supply p.d. divided by R, and falls exponentially to zero as the capacitor charges. Charge and p.d. rise while the current falls.

Is capacitance in the H2 Physics 9478 syllabus?

Yes. Capacitance and energy stored are in Topic 14 Electric Fields. Capacitors in series and parallel, and charging and discharging through a resistor, are in Topic 16 Circuits.

Want help with capacitance and RC circuits?

Our JC Physics classes cover the full 9478 syllabus, across our centres.