TGC The Game Changer

O Level Physics Formula Sheet (6091)

Quick answer: O Level Physics papers don't come with a formula list, so every formula below has to be memorised. They're grouped by the 20 syllabus topics, with what each symbol means and its SI unit.

Matches the SEC G3 Physics syllabus (K323, still examined as 6091) from 2027. Use g = 10 N/kg unless a question says otherwise.

1. Physical Quantities, Units and Measurement

Correcting a zero error
actual reading = observed reading − zero error
  • zero error: reading when the instrument should read zero (negative if below zero) (same unit as the reading)
  • Base units: mass (kg), length (m), time (s), current (A), temperature (K), amount of substance (mol).
  • Prefixes: nano n = 10−9, micro µ = 10−6, milli m = 10−3, centi c = 10−2, deci d = 10−1, kilo k = 103, mega M = 106, giga G = 109, tera T = 1012.
  • Vectors are added by drawing them to scale, tip to tail.

2. Kinematics

Average speed
average speed = total distance / total time
  • distance: total distance travelled (m)
  • time: total time taken (s)
Acceleration
a = (v − u) / t
  • a: acceleration (m/s2)
  • v: final velocity (m/s)
  • u: initial velocity (m/s)
  • t: time taken (s)
Reading motion graphs
displacement = area under v–t graph
  • v–t graph: velocity against time graph

Gradient of a v–t graph = acceleration. Gradient of a displacement–time graph = velocity.

Free fall
g ≈ 10 m/s2
  • g: acceleration of free fall near the Earth's surface (m/s2)

Constant for a body falling without air resistance.

3. Dynamics

Resultant force
F = ma
  • F: resultant force (N)
  • m: mass (kg)
  • a: acceleration (m/s2)
Weight
W = mg
  • W: weight (N)
  • m: mass (kg)
  • g: gravitational field strength (10 N/kg on Earth) (N/kg)

4. Turning Effect of Forces

Moment of a force
moment = F × d
  • F: force (N)
  • d: perpendicular distance from the pivot to the line of action of the force (m)

Unit of moment: N m.

Principle of moments
sum of clockwise moments = sum of anticlockwise moments
  • moments: taken about the same pivot (N m)

Holds for a body in equilibrium.

5. Pressure

Pressure
p = F / A
  • p: pressure (Pa (N/m2))
  • F: force acting normal to the surface (N)
  • A: area (m2)
Density
ρ = m / V
  • ρ: density (kg/m3 (or g/cm3))
  • m: mass (kg)
  • V: volume (m3)
Pressure due to a liquid column
p = hρg
  • h: height (depth) of the liquid column (m)
  • ρ: density of the liquid (kg/m3)
  • g: gravitational field strength (N/kg)
Total pressure at a depth
p = patm + hρg
  • patm: atmospheric pressure (about 1.0 × 105 Pa at sea level) (Pa)

Used with manometers and barometers.

Hydraulic press
F1 / A1 = F2 / A2
  • F1, F2: forces on the two pistons (N)
  • A1, A2: areas of the two pistons (m2)

Pressure is transmitted equally through the enclosed liquid.

6. Energy

Kinetic energy
Ek = ½mv2
  • Ek: kinetic energy (J)
  • m: mass (kg)
  • v: speed (m/s)
Gravitational potential energy
Ep = mgh
  • Ep: gravitational potential energy (J)
  • g: gravitational field strength (N/kg)
  • h: height (vertical change in height) (m)
Work done
W = F × d
  • W: work done (J)
  • F: force (N)
  • d: distance moved in the direction of the force (m)
Power
P = E / t
  • P: power (W)
  • E: energy transferred (or work done) (J)
  • t: time taken (s)
Efficiency
efficiency = (useful energy output / total energy input) × 100%
  • efficiency: no unit, given as a percentage or a decimal

7. Kinetic Particle Model of Matter

  • No formulas to memorise. A higher temperature means a higher average kinetic energy of the particles.
  • Gas pressure comes from particles colliding with the container walls.

8. Thermal Processes

  • No formulas to memorise. Energy flows from higher to lower temperature until thermal equilibrium.
  • Radiation is affected by surface colour and texture, surface temperature and surface area.

9. Thermal Properties of Matter

Heat capacity
C = Q / Δθ
  • C: heat capacity of the whole object (J/°C (or J/K))
  • Q: energy transferred by heating (J)
  • Δθ: change in temperature (°C (or K))
Specific heat capacity
Q = mcΔθ
  • m: mass (kg)
  • c: specific heat capacity (J/(kg °C))
  • Δθ: change in temperature (°C)
Specific latent heat
Q = ml
  • m: mass changing state (kg)
  • l: specific latent heat of fusion or vaporisation (J/kg)

No temperature change while the state changes.

10. General Properties of Waves

Wave equation
v = fλ
  • v: wave speed (m/s)
  • f: frequency (Hz)
  • λ: wavelength (m)
Period
T = 1 / f
  • T: period, time for one complete oscillation (s)
Echo
2d = vt
  • d: distance to the reflecting surface (m)
  • v: speed of sound (m/s)
  • t: time between sending the sound and hearing the echo (s)

The sound travels there and back, hence 2d.

11. Electromagnetic Spectrum

Speed of electromagnetic waves in a vacuum
c = 3.0 × 108 m/s
  • c: speed of light (same for every region of the spectrum) (m/s)

Use with v = fλ to find frequency or wavelength.

  • Order of increasing frequency: radio, microwave, infrared, visible, ultraviolet, X-rays, gamma rays.

12. Light

Law of reflection
i = r
  • i: angle of incidence, measured from the normal (°)
  • r: angle of reflection, measured from the normal (°)
Refractive index (angles)
n = sin i / sin r
  • n: refractive index (no unit)
  • i: angle in air (or vacuum) (°)
  • r: angle in the medium (°)
Refractive index (speeds)
n = c / v
  • c: speed of light in a vacuum (m/s)
  • v: speed of light in the medium (m/s)
Critical angle
sin c = 1 / n
  • c: critical angle, inside the denser medium (°)

Total internal reflection happens when the angle of incidence in the denser medium is greater than c.

13. Static Electricity

  • Charge is measured in coulombs (C). Like charges repel, unlike charges attract.
  • Charging by rubbing moves electrons, never positive charges.

14. Current of Electricity

Charge and current
Q = It
  • Q: charge (C)
  • I: current (A)
  • t: time (s)
E.m.f. and potential difference
V = W / Q
  • V: p.d. (or e.m.f. E), work done per unit charge (V)
  • W: work done (energy transferred) (J)
  • Q: charge (C)
Resistance
R = V / I
  • R: resistance (Ω)
  • V: potential difference (V)
  • I: current (A)
Resistance of a wire
R ∝ L / A
  • L: length of the wire (m)
  • A: cross-sectional area (m2)

Double the length, double the resistance. Double the area, half the resistance.

Cells in series
Etotal = E1 + E2 + …
  • E: e.m.f. of each cell, facing the same way (V)

15. D.C. Circuits

Resistors in series
R = R1 + R2 + …
  • R: effective (combined) resistance (Ω)

Same current through each resistor. The p.d.s add up to the supply p.d.

Resistors in parallel
1/R = 1/R1 + 1/R2 + …
  • R: effective resistance, smaller than the smallest branch (Ω)

Same p.d. across each branch. Branch currents add up to the supply current.

Potential divider
Vout = R2 / (R1 + R2) × Vin
  • Vout: p.d. across R2 (V)
  • Vin: p.d. across both resistors (V)

The larger resistor takes the larger share of the p.d.

16. Practical Electricity

Electrical power
P = VI
  • P: power (W)
  • V: potential difference (V)
  • I: current (A)

Combined with V = IR: P = I2R = V2/R.

Electrical energy
E = VIt
  • E: energy transferred (J)
  • t: time (s)
Energy in kilowatt-hours
E = Pt
  • E: energy (kW h)
  • P: power (kW)
  • t: time (h)

1 kW h = 3.6 × 106 J. Cost = energy (kW h) × price per kW h.

17. Magnetism

  • No formulas to memorise. Field lines point from north to south outside a magnet.

18. Electromagnetism

  • No formulas to memorise. Use the right-hand grip rule for field direction and Fleming's left-hand rule for force direction.
  • The turning effect on a coil increases with more turns or a larger current.

19. Electromagnetic Induction

Transformer turns ratio
Vp / Vs = Np / Ns
  • Vp, Vs: primary and secondary voltages (V)
  • Np, Ns: number of turns on the primary and secondary coils
Ideal transformer power
VpIp = VsIs
  • Ip, Is: primary and secondary currents (A)

Power in = power out for an ideal (100% efficient) transformer.

Power lost in cables
P = I2R
  • I: current in the cables (A)
  • R: resistance of the cables (Ω)

Why electricity is transmitted at high voltage and low current.

20. Radioactivity

Nuclide notation
N = A − Z
  • A: nucleon (mass) number, protons + neutrons
  • Z: proton (atomic) number
  • N: number of neutrons
Alpha and beta decay
α: A − 4, Z − 2 β: A unchanged, Z + 1
  • α, β: alpha particle (helium nucleus), beta particle (fast electron)

Gamma emission changes neither A nor Z.

Half-life
amount left = initial amount × (½)n
  • n: number of half-lives = time elapsed / half-life
  • t½: half-life (s)

Works for activity, count rate or number of undecayed nuclei.

How to use this formula sheet

  • Learn the definitions too. Many marks ask for a definition in words, e.g. pressure is force per unit area.
  • Convert units first. cm to m, g to kg, minutes to s, kW to W, before you substitute.
  • Write the formula, then substitute. Markers give credit for a correct formula even if the final answer slips.
  • Give 2 or 3 significant figures and a unit on every final answer.

Frequently asked questions

Is there a formula sheet in the O Level Physics exam?

No. O Level Physics (6091) papers don't print a formula list, so you need to recall every formula. The syllabus lists each one as a relationship to "recall and apply".

How many formulas are there in O Level Physics?

About 40 core relationships across the 20 topics, most of them in mechanics, thermal properties and electricity. Several topics, like Magnetism and Thermal Processes, have none.

Do I need the equations of motion for O Level Physics?

They aren't in the 6091 syllabus. You need average speed, acceleration = change in velocity / time, and the gradient and area of motion graphs. The area under a velocity–time graph gives displacement.

What value of g should I use in O Level Physics?

Use 10 N/kg (or 10 m/s²) unless the question gives a different value.

Does the formula list change with the SEC in 2027?

No. G3 Physics (K323) keeps the same topics and relationships, and it's still examined under code 6091. See our 6091 syllabus guide.

Is this formula sheet the same for Combined Science Physics?

Mostly. Combined Science Physics leaves out several topics, including specific heat and latent heat, liquid pressure, total internal reflection and transformers. See Pure Physics vs Combined Science.

Want help putting the formulas to work?

Our Sec 3 and Sec 4 Physics classes drill exam questions on every topic, across our centres.